10 kN, 70 mm In-Line Servo Electric Cylinder Reference Performance Rated thrust: 10 kN (1 tonne) Stroke: 70 mm Structure: in-line servo motor and screw Speed, motor, brake, screw lead, mounting and feedback are finalized for the project. Keep the rod load axial and commission at low speed.
High-Thrust Brake-Equipped Servo Electric Cylinder A high-force servo-electric actuator with a motor brake for applications that require controlled holding when drive power is removed. The screw mechanism converts motor rotation into programmable linear position, speed and thrust. Advantages Clean operation without hydraulic oil or compressed-air leakage Precise position, speed and thrust control Energy-efficient operation and low routine maintenance High load capacity, fast response and low noise Easy PLC, motion-controller or fieldbus integration The brake is a holding device and must…
150 mm Short-Stroke Custom Servo Electric Cylinder A compact YSL75-series servo electric cylinder with a 150 mm reference stroke for pressing, positioning, assembly, testing and automated machinery. Key Features Programmable position, speed and force control In-line or compact fold-back construction High-precision screw transmission and servo feedback Multiple mounting, rod-end and motor options Optional brake, limit sensors and environmental protection Reference Configuration Stroke: 150 mm. Thrust, speed, motor, mounting and protection options are customized for the application. Selection Information Please provide…
1,800 mm Long-Stroke Servo Electric Cylinder A YSL93-series long-stroke actuator for applications requiring approximately 1.8 metres of controlled linear travel. Long-stroke axes require careful review of screw critical speed, buckling, guidance and resonance. Key Features Programmable position, speed and force control In-line or compact fold-back construction High-precision screw transmission and servo feedback Multiple mounting, rod-end and motor options Optional brake, limit sensors and environmental protection Reference Configuration Nominal stroke: 1,800 mm. Maximum usable speed and thrust depend on mounting orientation,…
Custom High-Thrust Fold-Back Servo Electric Cylinder A large YSL93-series actuator with the motor mounted parallel to the cylinder through a synchronous-belt transmission. The fold-back layout reduces overall installation length and supports custom flanges and rod ends. Key Features Programmable position, speed and force control In-line or compact fold-back construction High-precision screw transmission and servo feedback Multiple mounting, rod-end and motor options Optional brake, limit sensors and environmental protection Selection Information Please provide required thrust, stroke, speed, acceleration, accuracy, duty cycle,…
50 kN Servo Electric Cylinder with 250 mm Stroke A heavy-duty YSL134-series servo electric cylinder designed around 50 kN rated thrust and a 250 mm stroke for pressing, test loading and industrial automation. Key Features Programmable position, speed and force control In-line or compact fold-back construction High-precision screw transmission and servo feedback Multiple mounting, rod-end and motor options Optional brake, limit sensors and environmental protection Reference Configuration Rated thrust 50 kN (5-tonne-force class) Stroke 250 mm Transmission Servo motor, reduction…
Servo Electric Cylinders for Pressing and Packaging Machinery Servo-driven pressing systems provide programmable stroke, speed and force for assembly, forming, riveting, packaging and inspection processes. Advantages Recipe-based multi-stage motion Controlled approach, pressing and return speeds Position and optional load-cell force feedback Process curves, alarms and traceability Easy integration with PLCs and safety systems Applications Automotive component assembly, bearings and shafts, motors, electronics, household appliances, packaging, test stands and automated production lines. The actuator and machine frame must be sized together…
Trapezoidal Lead-Screw Servo Electric Cylinder A custom in-line electric cylinder using a trapezoidal lead screw. This screw type can be economical and may provide useful self-locking behaviour, but generally has lower efficiency and speed than a ball screw. Key Features Programmable position, speed and force control In-line or compact fold-back construction High-precision screw transmission and servo feedback Multiple mounting, rod-end and motor options Optional brake, limit sensors and environmental protection Suitable Uses Moderate-speed positioning, lifting and adjustment tasks where cost,…
High-Thrust Fold-Back Electric Cylinder with Brake A custom high-thrust fold-back actuator with an optional motor brake and application-specific mounting flange. The parallel motor layout saves axial installation space. Key Features Programmable position, speed and force control In-line or compact fold-back construction High-precision screw transmission and servo feedback Multiple mounting, rod-end and motor options Optional brake, limit sensors and environmental protection Brake Use A holding brake is recommended for vertical axes or whenever the load must remain secured after power loss….
Servo Electric Cylinder Body Without Motor A YSL64-series mechanical electric-cylinder assembly supplied without a servo motor for customers who need to integrate their preferred motor and drive. Scope of Supply Cylinder housing, piston rod and screw transmission Bearings, coupling interface and mounting hardware Optional sensors, brake interface and accessories Motor flange, shaft, torque, speed and encoder compatibility must be confirmed before production. Engineering and Integration Final performance is confirmed from payload, centre of gravity, stroke, speed, acceleration, accuracy, duty cycle,…
Servo Electric Cylinder with Brake for Multi-DOF Platforms A YSL75-series actuator configured for multi-axis motion platforms, with an optional motor holding brake for vertical-load security. Platform Features Fast closed-loop position and velocity response Coordinated multi-axis operation Custom stroke, rod end and mounting joints Optional brake, limit switches and feedback Engineering and Integration Final performance is confirmed from payload, centre of gravity, stroke, speed, acceleration, accuracy, duty cycle, mounting, environment and control-interface requirements.
16 kN Fold-Back Servo Electric Cylinder for Test Equipment A medium YSL75-series fold-back electric cylinder designed around 16 kN thrust for laboratory loading, test equipment and industrial automation. Reference Configuration Thrust class 16 kN Layout Fold-back, parallel motor Control Position, speed and optional force Engineering and Integration Final performance is confirmed from payload, centre of gravity, stroke, speed, acceleration, accuracy, duty cycle, mounting, environment and control-interface requirements.