YSL93 Large Electric Cylinders

YSL93L-10-100-10-750S Inline Servo Electric Cylinder Specifications Screw lead: 10 mm Stroke: 100 mm Rated force: 10 kN Rated / maximum speed: 50 mm/s Servo motor: 0.75 kW, customer supplied Rated torque / speed: 2.38 N·m at 3,000 rpm Control: pulse command Reduction ratio: 10:1 Mounting: front flange with M30×1.5 male thread Includes two normally-open limit switches, internal anti-rotation and grease lubrication.

YSL93R-10-300-10-750S 10 kN Fold-Back Electric Cylinder Reference Configuration Rated thrust: 10 kN (1 tonne) Stroke: 300 mm Reduction ratio: 10:1 Servo motor: 750 W with brake Structure: compact fold-back motor arrangement Referenced positioning accuracy: 0.05 mm, subject to final configuration and measurement conditions Features High-precision screw and adjustable servo motion Low-noise all-electric operation Multiple mounting and feedback options Optional environmental and safety protection Thrust, stroke, speed, duty cycle, load direction and mounting must be confirmed before manufacture. Correct axial loading…

YSL93R 20 kN, 300 mm Fold-Back Electric Cylinder Reference Configuration Rated thrust: 20 kN (2 tonnes) Stroke: 300 mm Lead: 10 mm Speed: 25 mm/s Servo motor: 750 W with brake Structure: compact fold-back arrangement Thrust, stroke, speed, motor, brake, anti-rotation arrangement, mounting and protection can be customized. Axial loading and scheduled lubrication are required for reliable operation.

100 kN Precision Fold-Back Electric Cylinder Reference Configuration Rated thrust: 100 kN Effective stroke: 150 mm Rated speed: 0–44 mm/s Servo motor: Panasonic 5.0 kW with brake Precision planetary gearbox: 15:1 Limit switches: three Referenced positioning accuracy: 0.05 mm Features Space-saving parallel motor arrangement with synchronous-belt transmission Programmable position, speed and thrust Low-noise, energy-efficient electric operation Custom stroke, speed, mounting and environmental protection Keep the load axial, commission initially at low speed and lubricate at the specified interval. Vertical applications…

YSL93L 15 kN, 100 mm In-Line Electric Cylinder Reference Configuration Series: YSL93L Rated thrust: 15 kN (1.5 tonnes) Stroke: 100 mm Screw lead: 10 mm Gearbox: 10:1 Servo motor: 1000 W The in-line motor and screw layout provides a direct, rigid drive arrangement for programmable position, speed and thrust. Optional limit switches, force sensors, linear scales, brakes and environmental protection are available.

YSL93R Fold-Back Servo Electric Cylinder The YSL93R is a compact fold-back actuator with the motor mounted parallel to the cylinder and power transferred through a synchronous-belt drive. The illustrated configuration uses a 1.5 kW servo motor rated at 2,000 rpm. Features Reduced installation length Programmable position, speed and thrust Custom stroke, reduction ratio, mounting and feedback Optional brake, anti-rotation and environmental protection Final thrust and speed depend on the selected screw, transmission and motor. Do not alter belt tension or…

YSL75L 5 kN, 900 mm In-Line Electric Cylinder Reference Configuration Model: YSL75L-5-900-1-750 Rated thrust: 5 kN (500 kg) Stroke: 900 mm Screw lead: 5 mm Servo motor: 750 W The in-line actuator converts controlled motor rotation into precise reciprocating linear motion. Long-stroke service requires correct axial alignment, structural support and an appropriate maximum-speed assessment.

YSL93R 20 kN Fold-Back Servo Electric Cylinder Reference Configuration Series: YSL93R Rated thrust: 20 kN (2,000 kg) Servo motor: Delta 3 kW with brake Structure: parallel motor and synchronous-belt transmission Stroke, speed, screw lead, reduction ratio, mounting and feedback are configured to order. Do not alter the factory-set belt tension, and maintain axial loading during operation.

Custom 750 mm In-Line Electric Cylinder Body A made-to-order long-stroke in-line electric-cylinder body with a referenced stroke of 750 mm. Manufacturing can follow an approved drawing or jointly developed specification. Data Required Thrust, stroke, speed and duty cycle Screw lead and accuracy Motor, coupling and gearbox interface Mounting and rod-end dimensions Feedback, limit switches and protection Long-stroke designs require proper guidance, axial alignment and a buckling and critical-speed review.

1,800 mm Long-Stroke Servo Electric Cylinder A YSL93-series long-stroke actuator for applications requiring approximately 1.8 metres of controlled linear travel. Long-stroke axes require careful review of screw critical speed, buckling, guidance and resonance. Key Features Programmable position, speed and force control In-line or compact fold-back construction High-precision screw transmission and servo feedback Multiple mounting, rod-end and motor options Optional brake, limit sensors and environmental protection Reference Configuration Nominal stroke: 1,800 mm. Maximum usable speed and thrust depend on mounting orientation,…

Custom High-Thrust Fold-Back Servo Electric Cylinder A large YSL93-series actuator with the motor mounted parallel to the cylinder through a synchronous-belt transmission. The fold-back layout reduces overall installation length and supports custom flanges and rod ends. Key Features Programmable position, speed and force control In-line or compact fold-back construction High-precision screw transmission and servo feedback Multiple mounting, rod-end and motor options Optional brake, limit sensors and environmental protection Selection Information Please provide required thrust, stroke, speed, acceleration, accuracy, duty cycle,…

High-Thrust Fold-Back Electric Cylinder with Brake A custom high-thrust fold-back actuator with an optional motor brake and application-specific mounting flange. The parallel motor layout saves axial installation space. Key Features Programmable position, speed and force control In-line or compact fold-back construction High-precision screw transmission and servo feedback Multiple mounting, rod-end and motor options Optional brake, limit sensors and environmental protection Brake Use A holding brake is recommended for vertical axes or whenever the load must remain secured after power loss….