YSL93L 15 kN, 100 mm In-Line Electric Cylinder Reference Configuration Series: YSL93L Rated thrust: 15 kN (1.5 tonnes) Stroke: 100 mm Screw lead: 10 mm Gearbox: 10:1 Servo motor: 1000 W The in-line motor and screw layout provides a direct, rigid drive arrangement for programmable position, speed and thrust. Optional limit switches, force sensors, linear scales, brakes and environmental protection are available.
YSL61R 100 mm, 125 mm/s Fold-Back Electric Cylinder Reference Configuration Model: YSL61R-5-100-2-400 Payload / thrust: 280 kg Stroke: 100 mm Lead: 5 mm Speed: 125 mm/s Synchronous-pulley ratio: 2:1 Servo motor: 400 W without brake The compact parallel motor layout is suitable where installation length is limited. A brake-equipped motor should be selected when required by a vertical-load risk assessment.
YSL75R 14 kN, 30 mm Servo Electric Cylinder Reference Configuration Model: YSL75R-5-30-10-400 Rated thrust: 14 kN Stroke: 30 mm Speed: 25 mm/s Planetary gearbox: 10:1 Motor, brake, mounting, protection and feedback options are selected to suit the application. Confirm thrust, stroke, speed and connection method when requesting a configuration.
10 kN, 520 mm Adjustable-Speed Fold-Back Servo Cylinder Reference Configuration Rated thrust: 10 kN (1 tonne) Stroke: 520 mm Speed: 50 mm/s, programmable Reduction ratio: 10:1 Servo motor: 0.75 kW, 3000 rpm Limit switch: NPN normally open Anti-rotation: optional Long-stroke operation requires appropriate speed, alignment and structural support. Lubricate regularly and use a suitable brake for vertical loads.
Custom In-Line Electric Cylinder Without Motor An in-line electric-cylinder assembly manufactured to the customer’s drawing or technical requirements and supplied without a motor when the customer prefers to integrate an existing drive. Customization Options Thrust, stroke, lead and speed Motor and gearbox interface Mounting and rod-end connection Limit switches, force sensors and linear feedback Anti-rotation mechanism Dust, moisture, salt-spray or other application-specific protection Motor torque, speed, inertia, brake, coupling and control compatibility must be reviewed before manufacture. Keep the operating…
YSL64L In-Line Servo Electric Cylinder The YSL64L uses an in-line layout in which the motor, coupling and screw mechanism share the same axis. It provides a rigid, straightforward arrangement for programmable linear position, speed and thrust. Configuration Options Custom thrust, stroke, lead and operating speed Servo motor with or without brake Limit switches, force sensor and linear feedback Alternative mounting and rod-end connections Anti-rotation and application-specific protection Please provide the required thrust, stroke, speed, mounting arrangement and motor specification for…
YSL93R Fold-Back Servo Electric Cylinder The YSL93R is a compact fold-back actuator with the motor mounted parallel to the cylinder and power transferred through a synchronous-belt drive. The illustrated configuration uses a 1.5 kW servo motor rated at 2,000 rpm. Features Reduced installation length Programmable position, speed and thrust Custom stroke, reduction ratio, mounting and feedback Optional brake, anti-rotation and environmental protection Final thrust and speed depend on the selected screw, transmission and motor. Do not alter belt tension or…
10 kN, 50 mm Fold-Back Electric Cylinder Reference Performance Rated thrust: 10 kN (1 tonne) Stroke: 50 mm Speed: 50 mm/s Structure: parallel motor, synchronous-belt fold-back drive Thrust, stroke, speed, motor, brake and mounting can be engineered for the machine. Commission at low speed, keep the rod load axial and follow the specified lubrication interval.
YSL75L 5 kN, 900 mm In-Line Electric Cylinder Reference Configuration Model: YSL75L-5-900-1-750 Rated thrust: 5 kN (500 kg) Stroke: 900 mm Screw lead: 5 mm Servo motor: 750 W The in-line actuator converts controlled motor rotation into precise reciprocating linear motion. Long-stroke service requires correct axial alignment, structural support and an appropriate maximum-speed assessment.
40 kN, 100 mm In-Line Electric Cylinder Reference Configuration Rated thrust: 40 kN (4 tonnes) Stroke: 100 mm Gearbox ratio: 25:1 Motor: Inovance motor supplied by the customer Gearbox: supplied by the customer Motor torque, flange, shaft, gearbox interface, brake and controller compatibility must be confirmed before manufacture.
YSL75R 800 kg, 150 mm Fold-Back Electric Cylinder Reference Configuration Model: YSL75R-5-150 Rated load: 800 kg Stroke: 150 mm Structure: fold-back synchronous-belt drive Supply scope: illustrated actuator supplied without motor The motor mounts parallel to the cylinder to reduce overall length. The selected motor, brake, transmission ratio and controller must meet the required thrust, speed and duty cycle.
24 V / 48 V DC In-Line Electric Cylinder A low-voltage in-line electric actuator for equipment using 24 V or 48 V DC power. The motor and screw convert rotary motion into controlled linear travel for automation, positioning and material-handling applications. Customization Options 24 V or 48 V DC motor Thrust, stroke, speed and duty cycle Limit switches and position feedback Mounting, rod end and anti-rotation Controller and environmental protection Current demand, power-supply capacity, load direction and stopping requirements must…