Yearly Archives: 2018

Three-DOF Rocking and Vibration Test Platform This test platform reproduces inclination and rocking conditions for marine, aerospace, vehicle, electrical and electronic equipment. It helps evaluate structural integrity and environmental adaptability under controlled, repeatable motion. Reference Motion Roll 0° to ±45°, 3–14 s period Pitch 0° to ±15°, 3–14 s period Yaw 0° to ±4°, 3–14 s period The original configuration references GB/T 2423.101, GJB 150.23 and GJB 150.23A. Price depends on payload, platform dimensions, angles, speed, control and acceptance requirements.

YSL64L 500 mm, 200 mm/s In-Line Servo Cylinder Reference Performance Series: YSL64L Rated load: 100 kg Stroke: 500 mm Speed: 200 mm/s Structure: in-line motor and screw The actuator provides programmable reciprocating motion for automation and positioning. Confirm duty cycle, acceleration, mounting, load alignment and stopping requirements.

YSL111R 20 kN, 500 mm Fold-Back Electric Cylinder Reference Performance Series: YSL111R Rated thrust: 20 kN (2 tonnes) Stroke: 500 mm Structure: compact fold-back synchronous-belt drive Speed, motor, transmission ratio, brake, anti-rotation, feedback and mounting are selected for the application. Long-stroke operation requires correct alignment and structural support.

YSL93R 20 kN Fold-Back Servo Electric Cylinder Reference Configuration Series: YSL93R Rated thrust: 20 kN (2,000 kg) Servo motor: Delta 3 kW with brake Structure: parallel motor and synchronous-belt transmission Stroke, speed, screw lead, reduction ratio, mounting and feedback are configured to order. Do not alter the factory-set belt tension, and maintain axial loading during operation.

Custom Short-Stroke, High-Thrust Servo Electric Cylinder A made-to-order electric actuator for applications requiring high force over a short, accurately controlled stroke, including pressing, clamping, forming, testing and automated assembly. Required Selection Data Continuous and peak thrust Stroke, speed, acceleration and cycle rate Available installation space and mounting Motor, brake and controller preference Force feedback, positional accuracy and environment The machine structure must maintain axial loading and provide suitable guarding, overload protection and emergency stopping.

YSL75R 7 kN, 30 mm Fold-Back Servo Cylinder Reference Configuration Model: YSL75R-5-30-5-400 Rated thrust: 7 kN (700 kg) Stroke: 30 mm Speed: 50 mm/s Reduction ratio: 5:1 Servo motor: 400 W Brake, feedback, mounting and protection are available according to the application. Commission at low speed and follow the specified lubrication schedule.

0.7 kN, 200 mm High-Speed Fold-Back Servo Cylinder Reference Performance Rated thrust: 0.7 kN (70 kg) Stroke: 200 mm Speed: 500 mm/s Motor brake: included in the illustrated configuration Structure: fold-back synchronous-belt drive High-speed operation requires confirmation of acceleration, duty cycle, moving mass, end cushioning, guarding and emergency stopping.

Servo Electric Cylinder for Cutting Equipment A programmable actuator for cutting, feeding, positioning and clamping mechanisms. Servo control supports repeatable position and speed profiles for integration with automated production equipment. Selection Requirements Cutting or clamping force Stroke, speed, acceleration and cycle rate In-line or fold-back installation envelope Position or force feedback Motor, brake, controller and machine-safety interface The completed cutting machine must provide suitable guarding and prevent access to moving and cutting parts.

60 kN Heavy-Duty Servo Electric Cylinder A high-thrust electric actuator rated at 60 kN (6 tonnes) for industrial pressing, lifting, testing and automation applications. Custom Engineering Stroke, speed, duty cycle and mounting Motor, gearbox and brake Force sensor and linear feedback Anti-rotation and environmental protection Overload protection and machine-control interface Support structure, buckling resistance and load alignment must be verified for the final installation.

60 kN, 900 mm Heavy-Duty Servo Electric Cylinder Reference Performance Rated thrust: 60 kN (6 tonnes) Stroke: 900 mm Drive: servo-electric screw actuator For this combination of high thrust and long stroke, the installation must be checked for rod buckling, side load, structural support and safe maximum speed. Motor, gearbox, brake and feedback are selected from the operating cycle.

YSL2022-TJ-6DOF-II Heavy-Truck Driving Simulator A six-degree-of-freedom training simulator based on a Dongfeng Tianjin heavy-truck cockpit. Real-time visual, audio and motion systems reproduce slopes, uneven surfaces, acceleration, braking, steering and sideslip cues. Training Value Vehicle-style controls and cockpit layout Fast, stable six-axis motion response Interactive virtual driving environment Repeatable hazardous scenarios that are difficult to practise safely in a real truck Instructor-led familiarization and skills training Software scenarios, displays, cockpit interfaces and motion parameters can be customized.

Custom 750 mm In-Line Electric Cylinder Body A made-to-order long-stroke in-line electric-cylinder body with a referenced stroke of 750 mm. Manufacturing can follow an approved drawing or jointly developed specification. Data Required Thrust, stroke, speed and duty cycle Screw lead and accuracy Motor, coupling and gearbox interface Mounting and rod-end dimensions Feedback, limit switches and protection Long-stroke designs require proper guidance, axial alignment and a buckling and critical-speed review.