Yearly Archives: 2018

Custom In-Line Electric Cylinder Without Motor An in-line electric-cylinder assembly manufactured to the customer’s drawing or technical requirements and supplied without a motor when the customer prefers to integrate an existing drive. Customization Options Thrust, stroke, lead and speed Motor and gearbox interface Mounting and rod-end connection Limit switches, force sensors and linear feedback Anti-rotation mechanism Dust, moisture, salt-spray or other application-specific protection Motor torque, speed, inertia, brake, coupling and control compatibility must be reviewed before manufacture. Keep the operating…

YSL64L In-Line Servo Electric Cylinder The YSL64L uses an in-line layout in which the motor, coupling and screw mechanism share the same axis. It provides a rigid, straightforward arrangement for programmable linear position, speed and thrust. Configuration Options Custom thrust, stroke, lead and operating speed Servo motor with or without brake Limit switches, force sensor and linear feedback Alternative mounting and rod-end connections Anti-rotation and application-specific protection Please provide the required thrust, stroke, speed, mounting arrangement and motor specification for…

YSL93R Fold-Back Servo Electric Cylinder The YSL93R is a compact fold-back actuator with the motor mounted parallel to the cylinder and power transferred through a synchronous-belt drive. The illustrated configuration uses a 1.5 kW servo motor rated at 2,000 rpm. Features Reduced installation length Programmable position, speed and thrust Custom stroke, reduction ratio, mounting and feedback Optional brake, anti-rotation and environmental protection Final thrust and speed depend on the selected screw, transmission and motor. Do not alter belt tension or…

10 kN, 50 mm Fold-Back Electric Cylinder Reference Performance Rated thrust: 10 kN (1 tonne) Stroke: 50 mm Speed: 50 mm/s Structure: parallel motor, synchronous-belt fold-back drive Thrust, stroke, speed, motor, brake and mounting can be engineered for the machine. Commission at low speed, keep the rod load axial and follow the specified lubrication interval.

YSL75L 5 kN, 900 mm In-Line Electric Cylinder Reference Configuration Model: YSL75L-5-900-1-750 Rated thrust: 5 kN (500 kg) Stroke: 900 mm Screw lead: 5 mm Servo motor: 750 W The in-line actuator converts controlled motor rotation into precise reciprocating linear motion. Long-stroke service requires correct axial alignment, structural support and an appropriate maximum-speed assessment.

Three-DOF Driving Simulator with Triple Displays This driving simulator combines a three-axis motion base with three displays to provide a wide visual field and physical roll, pitch and yaw cues. Typical Uses Driver training and safety education Vehicle-control and human-factor research Road-condition and handling demonstrations Interactive entertainment Reference Angular Range Roll Up to ±45° Pitch Up to ±15° Yaw Up to ±4° Actual motion range, speed, display arrangement and software interface are customized for the project.

40 kN, 100 mm In-Line Electric Cylinder Reference Configuration Rated thrust: 40 kN (4 tonnes) Stroke: 100 mm Gearbox ratio: 25:1 Motor: Inovance motor supplied by the customer Gearbox: supplied by the customer Motor torque, flange, shaft, gearbox interface, brake and controller compatibility must be confirmed before manufacture.

10 kN One-Tonne Six-DOF Wave, Flight and Earthquake Platform A six-axis motion platform in the one-tonne payload class for wave, aircraft, vehicle, earthquake and equipment-test simulation. Control Capabilities Six-axis pose and compound motion Sine, script and recorded-profile commands Road, wave, flight and random-wave reproduction Experiment-data storage and real-time curves TCP/IP and synchronization interfaces Stroke, angular range, velocity, acceleration and controller configuration are customized. Payload rating must be verified against the centre of gravity and required dynamics.

YSL75R 800 kg, 150 mm Fold-Back Electric Cylinder Reference Configuration Model: YSL75R-5-150 Rated load: 800 kg Stroke: 150 mm Structure: fold-back synchronous-belt drive Supply scope: illustrated actuator supplied without motor The motor mounts parallel to the cylinder to reduce overall length. The selected motor, brake, transmission ratio and controller must meet the required thrust, speed and duty cycle.

24 V / 48 V DC In-Line Electric Cylinder A low-voltage in-line electric actuator for equipment using 24 V or 48 V DC power. The motor and screw convert rotary motion into controlled linear travel for automation, positioning and material-handling applications. Customization Options 24 V or 48 V DC motor Thrust, stroke, speed and duty cycle Limit switches and position feedback Mounting, rod end and anti-rotation Controller and environmental protection Current demand, power-supply capacity, load direction and stopping requirements must…

Servo Electric Cylinder for Pressing and Stamping Equipment A programmable electric actuator for presses, stamping fixtures and automated forming equipment. Servo control enables repeatable position, speed and thrust profiles without a hydraulic power unit. Project Options Required pressing thrust, stroke, speed and cycle rate In-line or compact fold-back construction Force sensor, linear feedback and limit switches Brake, tooling connection and mounting arrangement PLC or motion-controller integration Machine guarding, overload protection, tooling alignment and the required safety category must be defined…

YSL75R 1.3 kN, 30 mm Fold-Back Servo Cylinder Reference Configuration Model: YSL75R-5-30-10-400 Rated thrust: 1.3 kN (130 kg) Stroke: 30 mm Structure: parallel motor with synchronous-belt drive Motor, reduction ratio, speed, brake, feedback and mounting are finalized for the operating cycle. Keep external torque off the rod and lubricate as specified.