YSL64 Standard Electric Cylinders

Rear-Flange Fold-Back Servo Electric Cylinder A compact YSL64-series electric cylinder with a rear-flange mounting arrangement and parallel servo motor. It is intended for machinery where axial installation space is restricted. Options Custom stroke, thrust and speed Rear flange and alternative mounting interfaces Motor brake, limit sensors and rod-end accessories Position, speed and optional force control External guidance is required when the load introduces significant radial force or moment.

Servo Electric Cylinders for Six-DOF Motion Platforms Matched electric cylinders provide the coordinated linear axes used in six-degree-of-freedom Stewart platforms. Platform Requirements Consistent stroke, speed and acceleration across all actuators Low backlash and repeatable servo response Suitable universal or spherical joints Coordinated controller and safety limits Brake or load-support provisions where required Actuator selection follows the platform inverse-kinematic load, maximum velocity, centre of gravity and duty cycle.

1,200 mm Long-Stroke Servo Electric Cylinder A custom YSL64-series electric cylinder providing 1,200 mm of controlled linear travel for automation, lifting, positioning and special machinery. Long-Stroke Design Screw critical speed and buckling must be checked External guidance supports the load and prevents rod side force Maximum speed may decrease as effective screw length increases Mounting rigidity and alignment affect life and accuracy Thrust, speed, motor, brake, mounting and protection are customized for the operating cycle.

950 mm Fold-Back Electric Cylinder for Wet Environments, Without Motor A custom YSL64-series mechanical actuator with a 950 mm stroke, supplied without a motor for integration into wet-environment equipment. Environmental Requirements Underwater or continuously wet operation is not a standard assumption. The required immersion depth, duration, water type, pressure, corrosion exposure, cable sealing and IP protection must be specified and confirmed in the final design. Long-Stroke Considerations Screw critical speed and buckling External load guidance and rod alignment Corrosion-resistant materials…

950 mm Long-Stroke Fold-Back Servo Electric Cylinder A compact-width YSL64-series actuator providing 950 mm of programmable linear travel. The servo motor is mounted parallel to the cylinder through a synchronous-belt transmission. Applications Long-travel positioning and adjustment Automated handling and lifting Test equipment and special machinery Multi-position process control Final thrust and maximum speed depend on screw selection, mounting orientation, guidance and duty cycle.

2 kN Fold-Back Electric Cylinder with 800 mm Stroke Reference model YSL61R-5-800-750 Thrust 2 kN Stroke 800 mm Reference speed 250 mm/s Layout Fold-back The parallel motor layout saves installation length. Long-stroke performance requires checks for screw critical speed, buckling, resonance, alignment and external guidance. Final continuous ratings depend on duty cycle, mounting and the selected motor and screw.

Servo Electric Cylinders for Dispensing and Filling Machines Servo electric cylinders provide programmable stroke and speed for adhesive dispensing, liquid filling, dosing and packaging machinery. Process Benefits Repeatable volume or displacement control Adjustable acceleration and multi-stage speed Recipe changes through the PLC or HMI Position feedback and alarm monitoring Clean operation without hydraulic oil Materials, seals and protection must match the process environment; the actuator should not contact product unless specifically designed for it.